HevACS discussion and develoment

Serbitar
Frame Assembler
Posts: 28
Joined: Tue Jul 28, 2020 3:04 pm
Has thanked: 2 times
Been thanked: 3 times

Re: HevACS discussion and develoment

Post by Serbitar »

My berdair pump just turned up. I guess i know what i'm printing when thats all set up :D

Chezz
What is a BOM?
Posts: 19
Joined: Thu Oct 15, 2020 1:03 pm
Been thanked: 4 times

Re: HevACS discussion and develoment

Post by Chezz »

Hello,

this type of installation space cooler is material-intensive and complicated. Why doesn't anyone use a tangential cooler?
Place would be on the left. Do you only have to blow on one side? I see no problem.

https://www.google.com/search?q=tangent ... T0-bhMovDM

LgC

Ghost
What is a BOM?
Posts: 9
Joined: Sat Jul 25, 2020 1:21 am
Been thanked: 1 time

Re: HevACS discussion and develoment

Post by Ghost »

Sorry been very busy for the last few months but my print volume is 420 x420 x 300 ( bed size 455 x 455 )does this help for the HevACS. Does this help for a HevACS mode for you MirageC ???

jeroenstroeve
What is a BOM?
Posts: 2
Joined: Mon Aug 10, 2020 1:46 pm

Re: HevACS discussion and develoment

Post by jeroenstroeve »

Hi,
I am already using the HevACS on my 415x415x440 printer which is working nicely but does make a lot of noise.
I see there is now also a version with 2 fans on each side, I like that idea because then I can use fans that are more quiet.

You posted this earlier, with that design I was able to extend it a bit for my printer size.

Code: Select all

I have moved the WIP HevACS file into: "SubASSY/Frame and Enclosure" from the fusion collaborative area.
You can alternatively access via this link: https://a360.co/3fKAQRL
I tried searching for the collaborative area but couldn't find it, am I searching incorrectly or is that on invite-only basis?
Are you willing to share a new link that with the Fusion design that contains the updated designs with 2 fans so I can update it for my printer size?

Jeroen

Ghost
What is a BOM?
Posts: 9
Joined: Sat Jul 25, 2020 1:21 am
Been thanked: 1 time

Re: HevACS discussion and develoment

Post by Ghost »

Jeroen

Any chance I can get yr files so I can print the HEvacs for my printer

jeroenstroeve
What is a BOM?
Posts: 2
Joined: Mon Aug 10, 2020 1:46 pm

Re: HevACS discussion and develoment

Post by jeroenstroeve »

Ghost wrote:
Sat May 01, 2021 9:31 pm
Jeroen

Any chance I can get yr files so I can print the HEvacs for my printer
Hi Ghost,
I've attached my files that I modified for 415mm based on the 315mm design created by MirageC
Keep in mind that the newer 415mm files from MirageC are bigger in size, so they are not compatible.
You do not have the required permissions to view the files attached to this post.

saft57
What is a BOM?
Posts: 1
Joined: Fri Nov 20, 2020 7:31 am
Has thanked: 2 times
Been thanked: 1 time

Re: HevACS discussion and develoment

Post by saft57 »

I can't find the 315mm files, have they been released somewhere? On GitHub, I can only find the 415 and 515 variants

Mr Yod
What is a BOM?
Posts: 17
Joined: Thu May 06, 2021 5:32 pm
Has thanked: 2 times
Been thanked: 4 times

Re: HevACS discussion and develoment

Post by Mr Yod »

saft57 wrote:
Sun May 16, 2021 10:15 am
I can't find the 315mm files, have they been released somewhere? On GitHub, I can only find the 415 and 515 variants
Same here. :(

tommy2fast
What is a BOM?
Posts: 2
Joined: Tue May 25, 2021 2:13 am

Re: HevACS discussion and develoment

Post by tommy2fast »

Hello,

Is a version for the 615x615x640 version available?

Thanks
Thomas

Post Reply