Firmware setting

Post Reply
User avatar
Aure3D
HevORT Novice
Posts: 72
Joined: Mon Aug 10, 2020 1:50 pm
Location: France - Toulouse
Has thanked: 1 time
Been thanked: 7 times
Contact:

Firmware setting

Post by Aure3D »

Hello,

I need a help for my firmware I am the best of the noob for this.

I have build a 365*365*390 Hevort, I use the rrf for duet 3MB 6HC and raspberry.
I don't understand this:

Image

I don't understand how to configure triple Z with the doc excell FirmWareSettings.

I think there will probably be something else I won't be able to do.

Can anyone help me please?

Thanks

Beano
HevORT Apprentice
Posts: 94
Joined: Mon Apr 05, 2021 6:51 am
Been thanked: 3 times

Re: Firmware setting

Post by Beano »

Hi Aure,
I am running same size HevORT, busy with configuration currently. So I am using same duet 3 board, and I have basic motion running, end-stops for XY setup and working, and BLTouch probe configured and working. I am still awaiting my dragon hot-end to arrive, but HextrudORT without hot-end carriage is ok for basic test, I just use it to mount x end-stop and BLTouch.

I am currently testing my mesh bed-levelling, all seems ok. So I can share my basic config file in my Nemesis buildlog in Showroom? Note I am running HC6 in standalone mode, I will setup pi4 later….

Let me know if I can help.

Cheers,
Beano
HevORT Buildlog - Project Nemesis -> viewtopic.php?f=17&t=585

Post Reply