2 posts • Page 1 of 1
hi, everyone, I measured the belt width through this https://a360.co/35p2MH0 and found that the width is 10mm instead of 9mm（found in https://miragec79.github.io/HevORT/bom/BOM_XYHD9.htm) . Can I directly replace it with a 10mm belt?
- HevORT Builder
- Posts: 129
- Joined: Mon Jul 27, 2020 9:04 am
- Location: Switzerland
- Has thanked: 9 times
- Been thanked: 17 times
I have 9mm belts with gates idlers from e3d. It looks like there is enough space for a 10mm on them. It depends on your pulleys and idlers.