Show us your wiring!

Schematics, connectors, power supply...
Post Reply
Jhonno
HevORT Builder&Operator
Posts: 343
Joined: Wed Aug 12, 2020 3:01 pm
Location: UK
Has thanked: 15 times
Been thanked: 16 times

Show us your wiring!

Post by Jhonno »

As the title really.. Lets see how you have packaged your wiring etc!

I have ideas, just looking for some inspiration whilst I am pondering how I am going to lay mine out.

I am sure others are looking for inspiration also!

teeminus
HevORT Builder
Posts: 122
Joined: Wed Aug 26, 2020 10:49 am
Location: H, Germany
Has thanked: 3 times
Been thanked: 9 times

Re: Show us your wiring!

Post by teeminus »

You can find an image of my electrics carrier here: viewtopic.php?p=2706#p2706
And thats how it looks build into the printer: viewtopic.php?p=2821#p2821
🇩🇪

Jhonno
HevORT Builder&Operator
Posts: 343
Joined: Wed Aug 12, 2020 3:01 pm
Location: UK
Has thanked: 15 times
Been thanked: 16 times

Re: Show us your wiring!

Post by Jhonno »

teeminus wrote:
Thu Feb 25, 2021 4:39 am
You can find an image of my electrics carrier here: viewtopic.php?p=2706#p2706
And thats how it looks build into the printer: viewtopic.php?p=2821#p2821
Nice! Tidy..

Are the blocks to split the wiring into smaller sections?

teeminus
HevORT Builder
Posts: 122
Joined: Wed Aug 26, 2020 10:49 am
Location: H, Germany
Has thanked: 3 times
Been thanked: 9 times

Re: Show us your wiring!

Post by teeminus »

It's for grouping the wires. Bottom left are the three Z steppers: back center, front left, front right. Top is: X/Y motor left and right (4x2), extruder motor (4), hotend heating (2), hotend thermistor (2), voltage supply rails (4), endstops (4) and case lighting (3). I like to have things organized :)
🇩🇪

Jhonno
HevORT Builder&Operator
Posts: 343
Joined: Wed Aug 12, 2020 3:01 pm
Location: UK
Has thanked: 15 times
Been thanked: 16 times

Re: Show us your wiring!

Post by Jhonno »

teeminus wrote:
Thu Feb 25, 2021 9:54 am
It's for grouping the wires. Bottom left are the three Z steppers: back center, front left, front right. Top is: X/Y motor left and right (4x2), extruder motor (4), hotend heating (2), hotend thermistor (2), voltage supply rails (4), endstops (4) and case lighting (3). I like to have things organized :)
Haha! Organised is much better! Especially if it becomes time to fix or change something..

Post Reply