RailCore II

Raise the community awareness on other 3D printers type and development
Post Reply
hydrogen1
HevORT Novice
Posts: 73
Joined: Wed Sep 23, 2020 10:36 pm
Been thanked: 4 times

RailCore II

Post by hydrogen1 »

Its advertised as “a Core-XY based Reprap 3D printer” and is available as individual parts, a kit or fully assembled.

Frame is 1515. Depends on panels to stiffen the structure. Uses printed or machined parts. Limited to 300x300 build space.

https://railcore.org/

Post Reply