Hevort printed parts.
Hevort printed parts.
Can someone help me with the support structurs on the hevort parts. I have no clue where to put them. . .or even which orientation to print..
-
Aure3D
- HevORT Novice
- Posts: 77
- Joined: Mon Aug 10, 2020 1:50 pm
- Has thanked: 1 time
- Been thanked: 7 times
Re: Hevort printed parts.
For know the orientation you can download the STL and open this in Cura.
The sides that should be against the bed are indicated by the arrows:
Maybe I made a mistake on the carriages, if you print vertically the carriage (the side where the 2020 go inside) maybe than less support, but I printed like this and it's ok. Be carreful because the carriage is fragile when you manipulate.
The sides that should be against the bed are indicated by the arrows:
Maybe I made a mistake on the carriages, if you print vertically the carriage (the side where the 2020 go inside) maybe than less support, but I printed like this and it's ok. Be carreful because the carriage is fragile when you manipulate.