Frame BOM

Post Reply
Frame Assembler
Posts: 27
Joined: Sat Sep 12, 2020 9:55 am
Been thanked: 1 time

Frame BOM

Post by DLrocket89 »

Looking at the frame BOM - there are 104 nuts, 104 screws, and 26 corners. Are the nuts and screws for the corners?

What about other nuts to put on stuff down the road? Should I use the nuts that can be slipped in after it's together?

There are also things about the blind joints - does this require drilling holes through the extrusion? And a bunch of the ends would need to be tapped, right? I'm thinking of ordered from, and for $0.50 they'll tap ends and I'm thinking I'll do that to save myself the misery.



Post Reply