OFFICIAL HevORT Register

[Beano]

@Oliver: I am hoping I can claim serial number 0067. Please reserve it for me, my build is almost ready to print.See my buildlog ‘Nemesis’ in this section, cheers. Just waiting for boron nitride paste so I can fit the thermistor and heater to the mosquito, then I can print to make it official.

Will appreciate if you can accommodate my request for 0067

[extr00der]

@MirageC I'm ready for my serial now! At least I do believe my printer qualifies since it uses the standard HevORT XY. Nickname is the MinivORT (line 131 in the list).

Here is the printer moving:
https://www.youtube.com/watch?v=5OyOf1Wsvzo

Made a showcase thread too: viewtopic.php?f=17&t=652

EDIT: alright someone in the discord informed me I may just take the number, so I just did. Got #69

[DrakulaRS]

Прошу зарегистривать и меня. Закончил свой принтер. Уже напечатал несколько деталей. Качество принтера мне нравиться. Размеры 315х315х490. XY Standard Gantry, ZR_V2.5 (Angular Contact Bearing), Print Head with BMG -E3DV6 , OCtopus V1.1? BTT TFT 35 V3, Marlin

20211214_100730.jpg

20211214_100814.jpg

[Mr Yod]

@MirageC
I almost forgot to update the register (it's been a while that it prints) so, while updating the register, I also decided to change the name to a more fitting one: Theseus.
A fitting name indeed, since I upgraded it twice (from an old bedslinger to a Hypercube Evo and ending in a HevORT, that's in the process of getting a tool changer) by slowly changing all the parts, but hey: it's the same original printer! =)

I'm at the moment at row 149.

[RedFlash]

Congratulations HVT0100

[Mr Yod]

Yay!

[mordio]

I have taken the liberty of solving a serial number. After 5 months of sourcing, building and modifying, the monster is finally ready