My 515x515x540 HD12 Build

Show us your beautiful builds !
Jhonno
HevORT Builder&Operator
Posts: 496
Joined: Wed Aug 12, 2020 3:01 pm
Location: UK
Has thanked: 20 times
Been thanked: 24 times

Re: My 515x515x540 HD12 Build

Post by Jhonno »

So I have a weird issue.. My PT100 is interacting with the Stepper circuit. When I have the heater cartridge in the Volcano block and the PT100 it works fine. When I attach the stepper, it jumps in temp reading and gives an over voltage error. I've tried removing the PT100 from the block and just touching it on the stepper mounting face to the same effect.. Yet it was working before without issue.

Jhonno
HevORT Builder&Operator
Posts: 496
Joined: Wed Aug 12, 2020 3:01 pm
Location: UK
Has thanked: 20 times
Been thanked: 24 times

Re: My 515x515x540 HD12 Build

Post by Jhonno »

So a new PT100 has solved this issue.. Well, the temp changes ~1 degree now with the stepper plugged in.

ChanceTran
What is a BOM?
Posts: 1
Joined: Thu Oct 21, 2021 11:42 am

Re: My 515x515x540 HD12 Build

Post by ChanceTran »

Hi.....Ive been chipping away at my case for my single taxi truck. Outside measurements are 14.5" wide 25' long 17.25" tall. I have a port however dont truly know what its tuned to. I'm trusting its around 32-36hz. It will hold 1 American Bass HD12.

Simply considering what everybody thought its my first ported box and my biggest arrangement at this point.

Post Reply