Hank Build - It has begun!

Show us your beautiful builds !
Online
ReggieW
What is a BOM?
Posts: 24
Joined: Tue Mar 30, 2021 9:02 pm
Has thanked: 2 times

Finished printing parts!

Post by ReggieW »

Today I finished out the parts in purple. I must say, for as cantankerous as it can be my daVinci pro finally got me through. I started using a different (paper under nozzle gap) method of bed leveling as the built in leveling assistant is complete garbage (seriously, I spent nearly two hours attempting to level the bed..who does that??...turn the knobs this way...now turn the knobs that way...ugh.)

Received more stuff, and cut the 2020 extrusions.
stuff_2.jpg
Here's the left overs from my cuts:
leftovers_2.jpg
and the 2020 cutting instructions (again, only valid for a 415x415x440):
Screen Shot 2021-04-05 at 3.41.18 PM.png
You do not have the required permissions to view the files attached to this post.

Online
RedFlash
HevORT Builder
Posts: 129
Joined: Mon Jul 27, 2020 9:04 am
Location: Switzerland
Has thanked: 9 times
Been thanked: 17 times

Re: An awkward popsicle...

Post by RedFlash »

ReggieW wrote:
Mon Apr 05, 2021 3:18 pm
Tried to pull a fast one and hot swap the reel with some purple, but the print split at the color break.
I did this with blue and purple PLA and it was good. That were exciting 5 Minutes. :D

Jhonno
HevORT Builder&Operator
Posts: 348
Joined: Wed Aug 12, 2020 3:01 pm
Location: UK
Has thanked: 16 times
Been thanked: 16 times

Re: An awkward popsicle...

Post by Jhonno »

RedFlash wrote:
Tue Apr 06, 2021 2:42 pm
ReggieW wrote:
Mon Apr 05, 2021 3:18 pm
Tried to pull a fast one and hot swap the reel with some purple, but the print split at the color break.
I did this with blue and purple PLA and it was good. That were exciting 5 Minutes. :D
Hot swap is always an interesting one!

Post Reply