Hi from Hong-Kong

Introduce yourself and tell us what you are looking for from this project :)
Post Reply
LChampon
What is a BOM?
Posts: 2
Joined: Thu Mar 18, 2021 11:41 am

Hi from Hong-Kong

Post by LChampon »

Hi all,

I need to scale up my 3D printer for a project. Need bigger and faster :D

Laurent

User avatar
firegun
Printed Parts ready
Posts: 44
Joined: Wed Jan 13, 2021 2:49 pm
Has thanked: 4 times
Been thanked: 3 times

Re: Hi from Hong-Kong

Post by firegun »

Hello!

Welcome aboard! Decided already what size you going for?! :D

LChampon
What is a BOM?
Posts: 2
Joined: Thu Mar 18, 2021 11:41 am

Re: Hi from Hong-Kong

Post by LChampon »

Yes. Going for a 515x515 x640 . Probably Clear Path Servo.

Beano
HevORT Builder&Operator
Posts: 177
Joined: Mon Apr 05, 2021 6:51 am
Been thanked: 9 times

Re: Hi from Hong-Kong

Post by Beano »

I have a pair of ClearPath servos here, but to optimize printing-quality at high-speed, I suspect we will need to beef the frame up to be much stiffer, using at least 4040, preferably 8040 for the corner-beams and 4040 everywhere else. Will allow for better damping and significantly improved rigidity to absorb and manage high-speed reversal of X-gantry.

At some point I might adapt the current HD12 to suit such an animal....provided I can get good enough quickly enough in Fusion 360, as I am much better at AutoCAD :(

Will keep an eye on your build once you start the work-log.

Cheers,
Beano
HevORT Buildlog - Project Nemesis -> viewtopic.php?f=17&t=585

EricaPullman
What is a BOM?
Posts: 5
Joined: Wed Jan 05, 2022 10:43 pm

Re: Hi from Hong-Kong

Post by EricaPullman »

Welcome aboard!


_________________

długa kurtka jeansowa

Post Reply