Hello from Beautiful British Columbia

Introduce yourself and tell us what you are looking for from this project :)
Post Reply
HellfireHD
What is a BOM?
Posts: 4
Joined: Fri Feb 05, 2021 12:14 pm

Hello from Beautiful British Columbia

Post by HellfireHD »

Greetings from Sunny Okanagan!

I got excited when I stumbled across the HevORT on YouTube. I've been designing and redesigning my own large format 3D printer for a couple of years now but have never achieved the confidence in my design to start building it. The HevORT meets (and exceeds) my wildest goals and I can't wait to get started. The obstacle now is making sure my MP Select Mini can print all the required parts (It might not have a large enough print area) and then sourcing all the parts (particularly the extrusions) in Canada.

Jhonno
HevORT Builder&Operator
Posts: 275
Joined: Wed Aug 12, 2020 3:01 pm
Location: UK
Has thanked: 7 times
Been thanked: 11 times

Re: Hello from Beautiful British Columbia

Post by Jhonno »

Hello! What flavour of HevORT are you planning to build? None of the parts are particularly big, so you should be fine..

HellfireHD
What is a BOM?
Posts: 4
Joined: Fri Feb 05, 2021 12:14 pm

Re: Hello from Beautiful British Columbia

Post by HellfireHD »

I'm planning the ZRv2.5 and the XYHD12. Printable volume of around 550x550x490. I've found https://www.rmmc.net/8020/ which can supply my extrusion and is only a ~4 hour drive from me. Still looking for cheaper options though so suggestions are welcome.

Post Reply