List of available CAD Files

[MirageC]

! Post under construction !

This list can also be found on the github page at: https://miragec79.github.io/HevORT/purchased/
Click on the pictures to access the Fusion Web Viewer.

Complete Printer: (Enclosure and Electronics not yet included.)

• With Standar XY, ZRV2, Hemera FrontMount and BMG Aqua

Frame & Enclosure:

• Frame with Electronics Bay (315*315*340 print area)
• Enclosure - to come...

XY Axis:

• Standard XY axis
• HT - Hight Temperature (5mm bore Gates pulleys)
• HD9 - Heavy Duty with 9mm belts - ECD: Sept2020

Z Axis:

• Standard ZR (Not recommended to be used with Low end quality SFU1204 Ball Screw (China)
• ZR_V2 with Wobble Wings and double thrust bearings for SFU1204 better stability

[LudoD]

Dear,

First of all a great bow for the excellent design you made.
I tried to download the complete printer design in Inventor file format, but I don't receive any link in my e-mail.
other files do work

thanks in advance

[ProtoMon]

The content delivery and emailing is handled by Autodesk, so if the link doesn't come through that's on their end.
It does take a few minutes to a half hour for the conversion to complete and the download email to come in though.
I would suggest the usual check of the spam folder, possibly create a protonmail email address if your provider is blocking.

The Inventor download comes in as all solids without the feature data, so it may also be advantageous to install Fusion if you're interested in modifying the design(s) more than superficially.

[MirageC]

Please note that this printer was designed using direct modelling. No history data is available and not all sketches were kept.

[Jhonno]

Downloaded the files and have been assembling my printer in Inventor.. For the Bed Arm Rod End Support it comes in a row of 3.. Is there a file of just the 1?

[Jhonno]

Is there a model of the corner brackets also? Just being lazy on that one and not come across one as yet.

[jbasol]

Is there an easy way to determine screw size/length in the Fusion360 viewer? For example when I look at the XY Gantry, if I isolate one of the screws that holds the rail to the tnut in the frame I can click measure and try to carefully select the tip and base of the screw to determine it's length (I believe 10mm in this case). Is there a better method for determining this? In some cases deductive reasoning from the BOM will provide guidance, but not sure if there's some other method, tool, or list somewhere I'm missing? Thanks!

-John

[jbasol]

I found the trouble. The web viewer doesn't display all the object properties. When I opened the files in the full Fusion360 application, the part names were present.

[Cassiopeia]

@MirageC i saw the 315 -340 HEVAC files (stl) on github. Thanks for that. Is it possible you could post the CAD files? stp or fusion360? id like to customize them a little...if i may..

[dummy]

[

• HD9 - Heavy Duty with 9mm belts - ECD: Sept2020

Hi,
i' m already building the HD9 Version, but liked to ask if there exist any detailed CAD Files for the HD9/HD12 , since i' m struggling with assembling all those pulleys and bearings...