Tolerances

Post Reply
medicus
What is a BOM?
Posts: 13
Joined: Tue Jul 28, 2020 10:33 am

Tolerances

Post by medicus »

I noticed that a lot of the parts don't have tolerances, i.e. hole for m3 screw is 3mm. Are the parts generally meant to be printed with an expansion factor?

User avatar
MirageC
Site Admin
Posts: 497
Joined: Fri Jul 24, 2020 12:52 pm
Has thanked: 7 times
Been thanked: 52 times

Re: Tolerances

Post by MirageC »

M3 screw holes are for most of them 3.2mm in diameter when no thread grabbing is required. Which one more specifically are you referring to?

medicus
What is a BOM?
Posts: 13
Joined: Tue Jul 28, 2020 10:33 am

Re: Tolerances

Post by medicus »

I was looking at the Y-Cartridges. Seems most / all holes are 3mm or 5mm as well as the opening for the 2020 being 20mm.

Post Reply