XY_HT BOM missing STLs

Post Reply
teeminus
HevORT Builder&Operator
Posts: 154
Joined: Wed Aug 26, 2020 10:49 am
Location: H, Germany
Has thanked: 4 times
Been thanked: 12 times

XY_HT BOM missing STLs

Post by teeminus »

Hi,

before disassembling my old HEVO to convert it to a HEVORT, I once again checked all BOMs to verify that I got everything set. Thats where I noticed, that the XY_HT BOM does no longer list the Y-Carriage parts.

Kind regards
Christian
🇩🇪

User avatar
MirageC
Site Admin
Posts: 497
Joined: Fri Jul 24, 2020 12:52 pm
Has thanked: 7 times
Been thanked: 54 times

Re: XY_HT BOM missing STLs

Post by MirageC »

Well... looks like they were never there in the first place... :oops:
I am revisiting the entire HT BOM to make sure all is right. Stay tuned

User avatar
MirageC
Site Admin
Posts: 497
Joined: Fri Jul 24, 2020 12:52 pm
Has thanked: 7 times
Been thanked: 54 times

Re: XY_HT BOM missing STLs

Post by MirageC »

Ok, I just redid the BOM on XYHT. Should be good now. unless my eyes are crooked... again ! :D Click The Image to get to the data webpage.
Image

teeminus
HevORT Builder&Operator
Posts: 154
Joined: Wed Aug 26, 2020 10:49 am
Location: H, Germany
Has thanked: 4 times
Been thanked: 12 times

Re: XY_HT BOM missing STLs

Post by teeminus »

I havn't counted the nuts and bolts but it seems like all required 3D printed parts are listed now. Thanks :-)
🇩🇪

Post Reply