HevORT Forums

Hey mate,

Your link is wrong... correct one is: https://www.thingiverse.com/thing:4912653

Hello mate, I get your point, in fact I've noticed that command to shutdown the steppers on the slicer and also removed that. But I don't believe what I'm experiencing is really related, I'm not printing. I manually send a G32 (in fact I do a couple until it is quite plane) + G29. Once it gets to pr...

Hello guys, Situation is as follows: after leveling the bed (Homing + True level), seems that as the Z axis moves, it slowly makes the back part of the bed to go unleveled. The issue presents even when creating the bed mesh, which ends up with a huge deep on the back part (I saw it go like 3+mm down...

My view on this is something like, the head tensioners are there for "big changes"/initial setup, the ones on the motors for fine tuning

Hey mate, still stuck? What you struggling with exactly?

I also had a bit of a rough start but bed is doing it's thing already

xtra wrote: ↑

Tue Jun 22, 2021 1:57 pm

Thank you for sharing. When I want to use the HD9 Gantry, than there is no need of the Belt tensioners at the Hemera body mount, right?

What makes you think that? Tensioners are there, and for a good reason

Dang it... this just made me sad now.. lmao.. got mine 1LC board a while back, and ofc it's v1.0... that thing with selectable VOUT is something I was really desiring... accelerometer also uber helpful... sad... ;P But seems some EU stores are at least expecting to have it eventually... https://www....

We have couple guys going for HT builds, take a look on viewtopic.php?f=17&t=200 for instance... I would like to reach that point in the "distant future", but one step a time ^^

nice Work but one question, how do you cool the tool board? or is the printer open? Oleg has reported problems where the board simply switched itself off because the ambient temperature is too high and even a fan does not run it at 70 degrees chamber temp That is a good question! :D I plan to do an...

If I'm getting this right you would like to have the 400x400 centered on the 800x800 frame ? I think you gonna run into some troubles to mount the things on the Z axis to begin with. Later on you would have to be careful on each and every print to make sure you using the center of the printing area,...